At COE Press Equipment, we know that many of our customers are planning equipment upgrades, facility expansions, or process improvements to stay ahead in a challenging market. This new tax landscape may offer a meaningful opportunity to accelerate those investments — whether through new coil feed lines, press room automation, or precision straightening systems that improve material handling efficiency.

Key Takeaways from the SEYI Article

• 100% Bonus Depreciation. Qualifying assets can now be fully expensed in the first year, significantly improving cash flow and ROI on new capital equipment. (Source)
• R&D Expensing Restored. Manufacturers can again deduct domestic R&D costs immediately, encouraging onshore innovation and technology development. (Source)
• 100% Factory Write-Off. Qualifying production facilities can now be written off in the first year of operation or completion — a major incentive for facility modernization. (Source)
• S-Corporation and Partnership Benefits. Updated rates and deductions, including the Section 199A deduction, can reduce the top marginal tax rate for qualified manufacturing income to around 29.6%. (Source)
• Energy Efficiency Incentives. Deductions for energy-efficient buildings, EV chargers, and solar installations are available through June 30, 2026 — making the next 18 months a critical window for facility upgrades. (Source)

What This Means for COE Customers

These tax changes reward companies investing in U.S.-based production capacity and process improvement. For metal stampers, fabricators, and OEM suppliers, it could mean faster payback periods on capital investments and stronger justification for upgrading aging equipment.

Whether you’re exploring a new feed line, press control retrofit, or cut-to-length system, this may be the right time to evaluate how your purchase aligns with available tax advantages. COE Press Equipment’s team can help you identify equipment configurations that improve efficiency, reduce downtime, and support your long-term manufacturing goals.

Next Steps to Consider

1. Review upcoming capital projects. Identify any planned equipment or facility investments that could qualify for 100% expensing.
2. Consult your financial and tax advisors. Confirm eligibility and timing to ensure compliance with IRS rules and state-level incentives.
3. Plan your energy and technology upgrades early. The window for energy-related deductions closes mid-2026 — integrating efficiency now can yield both tax and operational benefits.
4. Stay informed. As legislation evolves, COE will continue monitoring how these programs impact manufacturers and production planning.

COE’s Perspective

Manufacturers across industries — automotive, appliance, HVAC, and general metal stamping — are facing competitive pressures to do more with less. This tax legislation provides a rare opportunity to reinvest in U.S. operations and modernize production lines for long-term growth. Strategic upgrades in automation, precision straightening, and coil feeding systems not only improve output but may now deliver immediate financial advantages under the new tax framework.

COE Press Equipment remains committed to supporting our customers with coil processing solutions that maximize uptime, throughput, and return on investment. If you’re considering equipment upgrades, our team can help you evaluate system options that align with your production goals and timing.

Read the Original Article

For a detailed breakdown of the new tax provisions, visit the SEYI article: How the New Tax Law Creates Major Wins for U.S. Manufacturers.

Additional Sources and Verification

The provisions mentioned are largely part of the Tax Relief for American Families and Workers Act of 2024 (H.R. 7024), which builds upon previous legislation like the Tax Cuts and Jobs Act (TCJA) and the Inflation Reduction Act (IRA). For further verification, you can refer to the following resources:

• Bonus Depreciation (Section 179): The proposed law would restore 100% bonus depreciation for qualifying property. The official text of H.R. 7024 details this change. The National Association of Manufacturers (NAM) provides a clear summary of its impact on manufacturers.
• R&D Expensing (Section 174): A key provision of the new bill is the retroactive restoration of immediate expensing for domestic R&D costs. The accounting firm PwC offers a detailed analysis of this tax change.
• Qualified Improvement Property (QIP): The 100% write-off for factory modernizations often falls under QIP rules. The IRS provides official guidance on what qualifies as Qualified Improvement Property under Publication 946.
• Pass-Through Deduction (Section 199A): This deduction was established by the TCJA. The IRS explains the basics of the Qualified Business Income (QBI) deduction here.
• Energy Efficiency Incentives: Many of these credits were expanded by the Inflation Reduction Act. The U.S. Department of Energy provides a guide to the Commercial Building Federal Tax Deduction (Section 179D) and other energy-related incentives.

Further Resources for Manufacturers

Staying informed is critical. The following organizations provide ongoing analysis and resources tailored to the manufacturing industry:

• Precision Metalforming Association (PMA): Offers advocacy, industry reports, and updates on legislation affecting metal stampers and fabricators.
• National Association of Manufacturers (NAM): The nation’s largest manufacturing association, providing in-depth analysis of tax, labor, and trade policies.
• IRS Small Business and Self-Employed Tax Center: The official source for tax regulations, forms, and tools for business owners.
• Manufacturing Extension Partnership (MEP) National Network: A public-private partnership dedicated to providing resources to help small and medium-sized manufacturers succeed.

Modernize Your Production Line and Maximize Your Return

These tax incentives are designed to make it easier for U.S. manufacturers to invest in the technology needed to compete and grow. Don’t let this opportunity pass you by. Upgrading to a modern COE Press Equipment coil feed line or automation system can enhance your productivity, reduce waste, and improve operator safety—all while potentially qualifying for significant first-year tax deductions.

Ready to see how a capital investment can deliver an immediate impact on your bottom line? Contact the COE Press Equipment team today to request a quote or schedule a consultation.

Disclaimer: The information contained in this article is provided for general informational purposes only and should not be construed as tax, legal, or financial advice. COE Press Equipment does not provide professional tax or legal counsel. Customers should consult qualified advisors regarding their specific situation and eligibility for any tax benefits.

The post What the New U.S. Tax Law Means for Manufacturers and Metal Stampers appeared first on COE Press Equipment.

The hum of machinery and energy of innovation filled McCormick Place as thousands of professionals gathered for FABTECH 2025. At the center of the action, COE Press Equipment stood out with two well-placed exhibits, one dedicated to stamping and the other to fabrication, each highlighting how COE’s coil processing technology continues to evolve to meet the industry’s demand for precision, speed, and reliability.

Dual Presence Across the Show Floor

COE’s presence extended across both key sides of the show. In the metal forming hall, a 20×40 booth anchored the stamping section and showcased COE’s latest advancements in coil feeding systems, including the ServoMaster Sonic Series, a high-speed feed capable of exceeding 800 strokes per minute (SPM). Over the highway in the fabrication hall, COE maintained a smaller 10×10 space focused on conversations about cut-to-length solutions and future integration opportunities.

While the fabrication booth did not feature live equipment, it served as an effective meeting space where attendees could discuss applications, performance goals, and system compatibility. Throughout the week, visitors stopped by to learn how COE’s systems improve efficiency and simplify material handling. Conversations centered on practical applications such as running faster, reducing waste, and maintaining consistency in high-volume environments.

Trends Driving the Conversation

This year’s FABTECH confirmed what COE continues to see in the marketplace: manufacturers are concentrating on automation, flexibility, and cost efficiency. Attendees showed strong interest in technologies that help overcome labor challenges, streamline setup times, and integrate into connected manufacturing environments.

COE’s solutions support these goals by delivering precision coil feeding, advanced servo motion control, and modular designs that adapt to a wide range of applications. The ServoMaster Sonic Series drew attention for its high-speed accuracy and reliable performance, while the EcoCradle highlighted COE’s commitment to providing an economic, cost-effective alternative to traditional coil handling systems.

Building Momentum for FABTECH 2026

As the show concluded, COE Press Equipment left Chicago with new connections, strong engagement, and a clear direction for next year. In 2026, COE will return to FABTECH Las Vegas with two booths once again. On the stamping side, COE will collaborate with SEYI Presses to feature a live demonstration of material feeding directly into a SEYI press. The fabrication booth will introduce brand-new equipment presentations, including a Compact Cut-to-Length Line, giving attendees an up-close look at the next generation of COE technology.

FABTECH 2025 underscored the strength of innovation, collaboration, and clear vision at COE Press Equipment, setting the stage for another exciting year of progress in 2026.

The post COE Press Equipment Makes an Impact at FABTECH 2025 appeared first on COE Press Equipment.

The Hidden Cost of Skipping Maintenance

In the article, Anthony addresses the reality many manufacturers face—late-night maintenance calls, unplanned downtime, and parts that take too long to arrive. While it may seem efficient to push off inspections or repairs in order to keep production moving, the long-term consequences are far more costly

A 2023 GE Digital study cited in the article found the average cost of unplanned downtime in manufacturing can reach $260,000 per hour. In one case Anthony describes, a feed-line failure shut down production for three full days at an automotive plant, resulting in more than $1.2 million in losses, including penalties for late deliveries.

Why Every Press and Feed Line Needs Regular Attention

Anthony emphasizes that feed lines, presses, and ancillary equipment all experience wear and tear, no matter how robustly they’re built. Without regular preventive inspections, minor issues can escalate into catastrophic failures. He reinforces the importance of:

• Routine inspections and adjustments to ensure peak performance
• Prioritizing operator safety by maintaining equipment properly
• Protecting supplier and customer trust by avoiding missed delivery dates
• Reducing stress and overtime costs for maintenance teams and operators

Voices from the Shop Floor

The article also shares candid insights from those working in stamping facilities:

• “Every time we delay a maintenance task, I think about the last time we ignored a noise—and the line was down for three days.”
• “Maintenance is the cheapest insurance policy we’ve got.”

Read the full article here

Our Commitment

At COE Press Equipment, we know that long-term profitability depends on reliability. Anthony’s perspective reflects our commitment to helping customers reduce downtime, extend machine life, and maintain safe, productive operations through robust service and support programs.

The post Keeping the Wheels Turning: Why Preventive Maintenance Matters appeared first on COE Press Equipment.

For manufacturers like Jireh Metal Products, productivity and precision are more than buzzwords—they’re the heartbeat of daily operations. In 2018, as the company prepared for a major restructuring and equipment upgrade, the team sought ways to reduce coil change time in stamping operations while boosting operator efficiency. The challenge was clear: transition work from two mechanical 400-ton presses to a more advanced, streamlined press line—without disrupting customer schedules.

The Challenge: Streamlining Setup and Scaling for Growth

Jireh’s legacy systems handled the job, but weren’t optimized for the changing demands of today’s manufacturing. Setup times were long, newer operators struggled to get up to speed, and safely processing higher-strength materials was becoming increasingly difficult. To solve this, Jireh needed a feed line that could support tighter tolerances, accelerate training, and keep operators safe—all while handling complex jobs with minimal downtime.

The COE Solution: Advanced Automation Built for Operators

Jireh partnered with COE Press Equipment to integrate a new servo press and automated COE feed line. The impact was immediate:

• Reduced Coil Change Time
  The new line streamlined coil changes, saving approximately five minutes per changeover—a small gain that adds up quickly across shifts and setups.

• Faster Onboarding for New Operators
  COE’s Work Roll Advisor feature uses material specs (width, yield strength, thickness) to auto-calculate work roll penetration. As a result, less experienced operators can set up jobs with the same confidence and accuracy as seasoned team members.

• Safe Handling of High-Strength Materials
  With enhanced coil containment and robust design, the new feed line safely processes thicker and springier materials without compromising on speed or reliability.

“We can take a new operator and have them hit the ground running faster… even for critical parts with tight tolerances,” said a team member at Jireh.

The Result: A Smarter, Safer, More Capable Line

From install to production, the integration was smooth and fast—taking just over a week to get fully operational. Today, Jireh uses the line for its most complex, high-tolerance jobs, while planning to expand with two identical COE lines for 80- and 110-ton presses in the near future.

Thinking About Upgrading Your Line?

Whether you’re looking to simplify training, reduce coil change time in stamping operations, or handle tougher materials, Jireh’s experience shows what’s possible with the right partner.

Explore COE Feed Lines
Contact Us to Learn More

The post How Jireh Metal Products Improved Operator Efficiency and Cut Setup Time with a COE Feed Line appeared first on COE Press Equipment.

The post What Is a Coil Car? appeared first on COE Press Equipment.

At Coe Press Equipment, we’re thrilled to introduce our Coil Processing Solution for Roofing, designed to optimize production and efficiency for roofing manufacturers. Recently, we developed and shipped a highly efficient, compact system to a leading roofing systems manufacturer. This setup is a perfect example of how precision engineering and thoughtful design can elevate productivity while keeping costs in check.

Key Features of the Coil Processing Solution for Roofing

This powerful coil processing combo includes:

• 4,000# Coil Reel:
  Built for reliability, this reel smoothly pays off material and supports up to 4,000 lbs. of coil. The motorized payoff and variable speed control ensure consistent material handling for maximum efficiency as a Coil Processing Solution for Roofing.
• Compact 5-Roll Pull-Thru Straightener:
  Integrated behind the coil reel, this straightener eliminates coil set, providing flat, feed-ready material. Its compact footprint is perfect for manufacturers who need to optimize floor space without compromising performance.
• ServoMaster Series 2 Roll Feed:
  Known for its precision and durability, this feeder processes materials up to 6″ wide with feed accuracy of ±0.003″. Its advanced design includes low-inertia drive systems, satin chrome non-marking rolls, and a user-friendly touchscreen interface for quick setup and operation.

Material Versatility

This system was specifically configured to handle copper material up to 6 inches wide, making it ideal for applications requiring high precision and reliability. With its ability to work with a range of material specifications, it offers unparalleled flexibility to roofing and gutter system manufacturers.

A Cost-Effective Solution

What makes this system stand out is its balance between performance and affordability. By integrating a coil reel, straightener, and roll feed into one streamlined package, we provide our customers with a solution that minimizes downtime, maximizes ROI, and saves valuable floor space.

Why This Matters for Roofing Manufacturers

Roofing system production demands consistency, reliability, and precision. A system like this not only ensures smooth operation but also reduces waste, enhances tooling life, and boosts overall production efficiency. Whether you’re working with copper or other coil materials, having the right equipment makes all the difference in meeting customer expectations and maintaining a competitive edge.

Looking Ahead

With this Coil Processing Solution for roofing, we’re excited to see how this system will help our client achieve new levels of success in their operations. If you’re exploring ways to improve your coil processing efficiency, reduce costs, or optimize your production footprint, let’s talk. At Coe Press Equipment, we’re committed to finding the right solution for your unique needs.

Interested in learning more? Reach out to our team or browse our equipment offerings explore our full range of coil processing solutions.

The post A Compact and Cost-Effective Coil Processing Solution for Roofing Manufacturers appeared first on COE Press Equipment.

We’re excited to announce that COE Press Equipment has been recognized as the Coil Feed Press Equipment Manufacturer Company of the Year for 2024!

For over four decades, we’ve been committed to designing and manufacturing reliable, low-maintenance equipment that helps businesses optimize their operations. Our solutions, ranging from coil reels and precision straighteners to custom automation, are built to withstand heavy-duty use and provide consistent performance across all industrial sectors.

In a recent article, our president, Reid Coe, shares insights into what drives COE Press Equipment’s success and how we continue to innovate to meet our customers’ evolving needs. From providing high-performance equipment to offering full-service lifecycle support, we’re proud to help our clients achieve greater efficiency and ROI.

Read the full article here to learn more about how we’re shaping the future of the metal stamping industry and why our clients trust COE for their coil handling solutions.

The post COE Press Equipment Named Coil Feed Press Equipment Manufacturer Company of the Year 2024! appeared first on COE Press Equipment.

The post 5 Reasons Why Keeping a Clean Shop is Critical for Success appeared first on COE Press Equipment.

The coil reel is a pay-off device that starts most feed lines. In today’s environment, speed and the ability to handle various steel coils are essential. As a result, the coil reel has become the standard in most feed lines. Years ago, coil cradles competed with coil reels. However, the need to run cosmetic material, rewind coils, and safely un-band and thread new coils has established the coil reel as the dominant player in today’s feed lines.

Types of Coil Reels

The coil reel is available in two main versions: motorized (or powered) and pull-off.

Motorized Coil Reels

Motorized versions advance coils into a loop, either a conventional loop or a “paddle loop.” In a paddle loop, the loop forms around the coil’s outer diameter (OD) to reduce floor space. However, paddle loops require slower speeds, and running high-strength material in a paddle loop can cause containment issues. In either loop design, the material often advances to a feeder or straightener.

Pull-off Coil Reels

The pull-off version is used in a conventional feed line. This setup includes a pull-off reel, a powered straightener (which pulls the material off the reel), and a servo feed. Most setups also include a thread table that bridges the gap between the powered straightener and the servo feed, allowing hands-free threading of a new coil. People can confuse a pull-off reel with powered or motorized reels, as it can have powered threading to help advance the coil’s leading edge into the powered straightener. Once the material is captured in the straightener, the threading drive disengages. The correctly adjusted drag brake maintains a tight line of steel between the pull-off reel and the powered straightener. Without this tight line, jerking may occur, causing material damage and premature wear of the straightener.

Advancements in Coil Reel Design

Reel design and construction have lagged behind advancements in servo feeds and powered straighteners. However, several updates should be considered when purchasing a new coil reel.

Motorized Reels

1. Advanced Loop Controls: Touch-free controls command the drive as the loop height changes. Laser or ultrasonic eyes replace older “dancer arms” and can save multiple loop requirements to job memory.
2. Fail-Safe Brake: Prevents the mandrel from rotating due to internal “clock spring” forces when the loop is full or the line is off.

Pull-off Reels

1. Auto Drag Compensation: An eye monitors the coil’s OD and adjusts the drag brake pressure as the coil gets smaller.
2. Fail-Safe Drag Brakes: Provide full braking when the air source is off to prevent high-strength material from rotating the mandrel and paying material off onto the floor.

Features Common to Both Motorized and Pull-off Reels

1. Hydraulic Mandrel Expansion with Timers: Ensures the pads are tight to the coil’s ID without the hydraulic unit running constantly.
2. Bolted-On Back Plates: Prevents breakage seen in welded-on designed back plates.
3. Full Radius Mandrel Pads: Prevents material damage when using thin gauge material.
4. Powered Coil Guides: Eliminates coil keepers, allowing faster setup and better coil containment.
5. Option to Add Hold-Down Arms: Reels are designed to allow the addition of options, such as hold-down arms, later with a bolt-on design.

Understanding the different types of coil reels and the latest advancements in their design helps you make an informed decision when investing in new equipment for your feed line. The right coil reel can improve efficiency, reduce material damage, and enhance the overall performance of your production line.

Written by Tom Brockie, Sales

(Check out this FABTECH interview with Tom Brockie)

FAQs About Coil Reels

What is a coil reel used for?

A coil reel is used to hold and dispense coiled steel in a feed line, allowing smooth uncoiling into straighteners and feeders.

What’s the difference between a coil reel and a coil cradle?

Coil cradles support coils from underneath, while coil reels suspend the coil via an expanding mandrel. Reels are better for cosmetic materials and safer uncoiling.

How do you choose the right coil reel?

Consider material type, coil weight and width, uncoiling speed, and whether you need powered threading or loop control systems.

Are motorized coil reels better than pull-off reels?

Motorized coil reels are better for continuous operation and tight loop control. Pull-off reels are often paired with straighteners and offer lower-speed setups with brake drag control.

The post Science Behind the Solution: Coil Reels appeared first on COE Press Equipment.